FRONT LOWER SUSPENSION ARM INSPECTION

PROCEDURE


  1. INSPECT FRONT LOWER SUSPENSION ARM ASSEMBLY LH


    1. A004J4V

      Inspect the state of rotation of the ball joint.


      1. With the brake pedal depressed, attempt to move the top and bottom of the front tire in the axial direction, and confirm that there is no play.

      2. If there is any play, replace the front lower suspension arm assembly LH.

      3. With the brake pedal released, attempt to move the top and bottom of the front tire in the axial direction, and confirm that there is no play.

      4. If there is any play, replace the front axle hub.

      5. Install the nut to the front lower suspension arm assembly LH stud.

      6. A004IJQ

        Turn the stud back and forth.

        Standard
        There is no unusual resistance or play.

      7. If there is any unusual resistance or play, replace the front lower suspension arm assembly LH with a new one.

    2. Inspect the dust cover.


      1. Check that the dust cover is not cracked and that there is no grease on it.

      2. If the dust cover is cracked or there is grease on it, replace the front lower suspension arm assembly LH with a new one.