DIFFERENTIAL MOUNT CUSHION INSTALLATION

PROCEDURE


  1. INSTALL REAR NO. 2 DIFFERENTIAL MOUNT CUSHION


    1. A004H30E03
      Text in Illustration
      *a Arrow
      *b Matchmark

      Put matchmarks on the rear suspension member and new rear No. 2 differential mount cushion.

      CAUTION:

      Install the rear No. 2 differential mount cushion with the arrow marks facing upward and downward.

    2. A004JZIE02
      Text in Illustration
      *1 Rear Suspension Member
      *2 Rear No. 2 Differential Mount Cushion
      *3 SST(09571-01090)
      *4 SST(09571-01070)
      *5 SST(09571-01050)
      *6 SST(09571-01080)
      *7 SST(09571-01040)
      *8 SST(09571-01030)
      *9 SST(09571-01060)
      *a Hold
      *b Turn
      *c Start
      *d End
      A004I9S Front side

      Using SST, install the rear No. 2 differential mount cushion.

      SST
      09570-18010   ( 09571-01030, 09571-01040, 09571-01050, 09571-01060, 09571-01070, 09571-01080, 09571-01090 )

  2. INSTALL REAR NO. 1 DIFFERENTIAL MOUNT CUSHION


    1. A004K3OE03
      Text in Illustration
      *a Triangle Mark
      *b Matchmark

      Put matchmarks on the rear suspension member and new rear No. 1 differential mount cushion.

      Note

      Install the rear No. 1 differential mount cushion with the triangle mark facing upward.

    2. A004IKZE03
      Text in Illustration
      *1 Rear Suspension Member
      *2 Rear No. 1 Differential Mount Cushion
      *3 SST(09571-01150)
      *4 SST(09571-01130)
      *5 SST(09571-01190)
      *6 SST(09571-01120)
      *7 SST(09571-01170)
      *8 SST(09571-01140)
      *9 SST(09571-01160)
      *10 SST(09571-01180)
      *11 SST(09922-10010)
      *a Hold
      *b Turn
      *c Start
      *d End
      A004I9S Front side

      Using SST, install the rear No. 1 differential mount cushion.

      SST
      09570-18020   ( 09571-01120, 09571-01130, 09571-01140, 09571-01150, 09571-01160, 09571-01170, 09571-01180, 09571-01190 )
      09922-10010

      Note


      • Install the rear No. 1 differential mount cushion while checking that SST and the rear No. 1 differential mount cushion are not at an angle.

      • If the rear No. 1 differential mount cushion is pushed in at an angle, the installation becomes difficult. Be sure to set SST on the rear No. 1 differential mount cushion with no clearance.

  3. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY

    Click here

  4. INSTALL REAR STABILIZER BAR

    Click here

  5. INSTALL TAIL EXHAUST PIPE ASSEMBLY

    Click here

  6. INSTALL DIFFERENTIAL CARRIER ASSEMBLY

    Click here