DIFFERENTIAL MOUNT CUSHION REMOVAL

PROCEDURE


  1. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY

    Click here

  2. REMOVE TAIL EXHAUST PIPE ASSEMBLY

    Click here

  3. REMOVE REAR STABILIZER BAR

    Click here

  4. REMOVE REAR NO. 1 DIFFERENTIAL MOUNT CUSHION


    1. A004HCLE03
      Text in Illustration
      *1 Rear Suspension Member
      *2 Rear No. 1 Differential Mount Cushion
      *3 SST(09571-01180)
      *4 SST(09571-01160)
      *5 SST(09571-01140)
      *6 SST(09571-01170)
      *7 SST(09571-01190)
      *8 SST(09571-01110)
      *9 SST(09571-01100)
      *10 SST(09571-01150)
      *11 SST(09922-10010)
      *a Hold
      *b Turn
      *c Start
      *d End
      A004I9S Front side

      Using SST, remove the rear No. 1 differential mount cushion.

      SST
      09570-18020   ( 09571-01100, 09571-01110, 09571-01140, 09571-01150, 09571-01160, 09571-01170, 09571-01180, 09571-01190 )
      09922-10010

      Note


      • Make sure that SST does not come into contact with the cylindrical part of the rear suspension member and is not set at an angle.

      • Make sure that SST does not run on the weld bead around the cylindrical part.

  5. REMOVE REAR NO. 2 DIFFERENTIAL MOUNT CUSHION


    1. A004JOQE02
      Text in Illustration
      *1 Rear Suspension Member
      *2 Rear No. 2 Differential Mount Cushion
      *3 SST(09571-01090)
      *4 SST(09571-01070)
      *5 SST(09571-01050)
      *6 SST(09571-01080)
      *7 SST(09571-01020)
      *8 SST(09571-01010)
      *9 SST(09571-01060)
      *a Hold
      *b Turn
      *c Start
      *d End
      A004I9S Front side

      Using SST, remove the rear No. 2 differential mount cushion.

      SST
      09570-18010   ( 09571-01010, 09571-01020, 09571-01050, 09571-01060, 09571-01070, 09571-01080, 09571-01090 )