REAR DIFFERENTIAL CARRIER ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE REAR WHEEL

  2. DRAIN DIFFERENTIAL OIL


    1. A004JJS

      Using a hexagon wrench 10 mm, remove the rear differential filler plug and gasket.

    2. A004JHP

      Using a hexagon wrench 10 mm, remove the rear differential drain plug and gasket to drain the differential oil.

  3. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY

    Click here

  4. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY


    1. A004K33

      Support the rear differential carrier assembly with a transmission jack.

    2. A004I2B

      Remove the 5 bolts, rear upper differential mount stopper and rear lower differential mount stopper.

    3. Lower the transmission jack slowly.

    4. A004JY0

      Using a SST, disconnect the rear drive shaft assembly from the rear differential carrier assembly as shown in the illustration.

      SST
      09520-01010
      09520-24010   ( 09520-32040 )
    5. A004KT8

      Lower the transmission jack and pull off the rear drive shaft assembly from the rear differential carrier assembly, and then remove the rear differential carrier assembly.

      Tech Tips

      A004HAA

      Tie the disconnected rear drive shaft with a rope.