REAR DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. DRAIN DIFFERENTIAL OIL

    Click here

  2. REMOVE REAR DRIVE SHAFT ASSEMBLY LH

    Click here

  3. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY

    Click here

  4. REMOVE REAR DIFFERENTIAL CARRIER COVER

    Click here

  5. SECURE REAR DIFFERENTIAL CARRIER SUB-ASSEMBLY

    Click here

  6. REMOVE REAR DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL


    1. A004ISQE06
      Text in Illustration
      *1 Rear Differential Side Gear Shaft Oil Seal

      Using SST, remove the rear differential side gear shaft oil seal.

      SST
      09308-00010

  7. INSTALL REAR DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL


    1. A004JNPE06
      Text in Illustration
      *1 Rear Differential Side Gear Shaft Oil Seal

      Using SST and a hammer, install a new 2 rear differential side gear shaft oil seals.

      SST
      09213-70011
      09950-60010
      09950-70010   ( 09951-00410, 09951-00620, 09951-07100, 09952-06010 )
      Oil seal depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note


      • To ensure a proper seal, evenly tap in the rear differential side gear shaft oil seal.

      • When installing the oil seal, tap it in until its surface is flush with the rear differential carrier.

  8. INSTALL REAR DIFFERENTIAL CARRIER SUB-ASSEMBLY

    Click here

  9. INSTALL REAR DIFFERENTIAL CARRIER COVER

    Click here

  10. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY

    Click here

  11. INSTALL REAR DRIVE SHAFT ASSEMBLY

    Click here

  12. ADD DIFFERENTIAL OIL

    Click here