NEUTRAL POSITION SWITCH INSPECTION

PROCEDURE


  1. INSPECT NEUTRAL POSITION SWITCH ASSEMBLY


    1. A004H29E01
      Text in Illustration
      *a

      Component without harness connected

      (Neutral Position Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 Pushed 10 kΩ or higher
      1 - 2 Released Below 1 Ω

      If the result is not as specified, replace the neutral position switch assembly.