MANUAL TRANSMISSION OIL ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT MANUAL TRANSMISSION OIL


    1. Stop the vehicle in a level place.

    2. A004HPK

      Remove the manual transmission filler plug and the gasket.

    3. A004HA9E89
      Text in Illustration
      *a 0 to 5 mm (0 to 0.197 in.)

      Check that the oil surface is within 5 mm (0.197 in.) of the bottom of the manual transmission filler plug opening.

      Note


      • Excessively large or small amounts of oil may cause problems.

      • After replacing the oil, drive the vehicle and check the oil level again.

    4. Check for oil leakage when the oil level is low.

    5. Install the manual transmission filler plug and a new gasket.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }