CLUTCH MASTER CYLINDER(for LHD) DISASSEMBLY

PROCEDURE


  1. REMOVE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY


    1. Remove the master cylinder reservoir cap.

    2. Fix the clutch master cylinder assembly in a vise between aluminum plates.

      Note

      Do not overtighten the vise.

    3. Using a pin punch and a hammer, tap out the straight pin and remove the master cylinder body.

  2. REMOVE CLUTCH RESERVOIR GROMMET


    1. Remove the clutch reservoir grommet from the clutch master cylinder assembly.

  3. REMOVE MASTER CYLINDER PISTON SUB-ASSEMBLY

    A004JF2

    1. Using snap ring pliers, remove the snap ring while pushing the clutch master cylinder push rod.

    2. Remove the master cylinder piston sub-assembly and spring from the master cylinder body.

      Note

      Do not damage the inside of the master cylinder body.