CLUTCH FLUID ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT CLUTCH FLUID LEVEL


    1. A004KRI

      Check the clutch fluid level.

      If clutch fluid level is lower than the MIN line, check for leaks and inspect the clutch lines. If necessary, refill the master cylinder reservoir sub-assembly with clutch fluid to the MAX line after repair or replacement.

      Fluid
      SAE J1703 or FMVSS No. 116 DOT 3

      Note

      When adjusting fluid amount using a dropper or the like, do not use one which was used with liquid petroleum, water, or deteriorated clutch fluid. This may deteriorate seals or fluid, resulting a fluid leak and poor clutch function.