READ DATA LIST
Tech Tips
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Select the following menu items: Powertrain / Cruise Control / Data List.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| CCS Vehicle Spd | Vehicle speed / Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph) | Actual vehicle speed | - |
| CCS Mem Vehicle Spd | Stored vehicle speed / Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph) | Actual stored vehicle speed | - |
| Cruise Request Torque | Required engine torque / Min.: -32768 Nm, Max.: 32767 Nm | Actual required engine torque | - |
| Cruise Control | Cruise control system active condition / ON or OFF | ON: Cruise control activated OFF: Cruise control deactivated |
- |
| CCS Indicator M-CPU | Cruise control indicator light illumination signal (Main CPU) / ON or OFF | ON: Cruise control indicator light illuminated in green OFF: Cruise control indicator light not on |
- |
| Cancel Switch | CANCEL switch signal / ON or OFF | ON: CANCEL switch on OFF: CANCEL switch off |
- |
| SET/COAST Switch | -/SET switch signal / ON or OFF | ON: -/SET switch on OFF: -/SET switch off |
- |
| RES/ACC Switch | +/RES switch signal / ON or OFF | ON: +/RES switch on OFF: +/RES switch off |
- |
| CCS Ready M-CPU | Cruise control system standby condition (Sub CPU) / ON or OFF | Each time cruise control main switch (ON-OFF button) is pushed, ON/OFF changes | - |
| Main SW M-CPU | cruise control main switch signal (Main CPU) / ON or OFF | ON: cruise control main switch (ON-OFF button) pushed OFF: cruise control main switch (ON-OFF button) released |
- |
| Stop Light Switch 1 | Stop light switch signal1 / ON or OFF | ON: Brake pedal depressed OFF: Brake pedal released |
- |
| Stop Light Switch 2 | Stop light switch signal2 / ON or OFF | ON: Brake pedal depressed OFF: Brake pedal released |
- |
| Cruise Cancel : Main Switch | "CANCEL CODE" by cruise control main switch operation / ON or OFF | ON: "CANCEL CODE" detected OFF: "CANCEL CODE" not detected |
Refer to "CANCEL CODE" Click here. |
| Cruise Cancel : Stop/Brake Switch | "CANCEL CODE" by brake pedal operation / ON or OFF | ON: "CANCEL CODE" detected OFF: "CANCEL CODE" not detected |
Refer to "CANCEL CODE" Click here. |
| Cruise Cancel : Clutch Switch | "CANCEL CODE" by clutch pedal operation (for Manual Transmission) / ON or OFF | ON: "CANCEL CODE" detected OFF: "CANCEL CODE" not detected |
Refer to "CANCEL CODE" Click here. |
| Cruise Cancel : Neutral Switch | "CANCEL CODE" by shift lever operation (for Automatic Transmission) / ON or OFF | ON: "CANCEL CODE" detected OFF: "CANCEL CODE" not detected |
Refer to "CANCEL CODE" Click here. |
| Cruise Cancel : Cancel Switch | "CANCEL CODE" by CANCEL switch operation / ON or OFF | ON: "CANCEL CODE" detected OFF: "CANCEL CODE" not detected |
Refer to "CANCEL CODE" Click here. |
| Cruise Cancel : IG Switch | "CANCEL CODE" by ignition switch operation / ON or OFF | ON: "CANCEL CODE" detected OFF: "CANCEL CODE" not detected |
Refer to "CANCEL CODE" Click here. |
| Cruise Cancel : Vehicle Speed 1 | "CANCEL CODE" by abnormal vehicle speed signal / ON or OFF | ON: "CANCEL CODE" detected OFF: "CANCEL CODE" not detected |
Refer to "CANCEL CODE" Click here. |
| Cruise Cancel : Engine Revolution | "CANCEL CODE" by raising engine speed / ON or OFF | ON: "CANCEL CODE" detected OFF: "CANCEL CODE" not detected |
Refer to "CANCEL CODE" Click here. |
| Cruise Cancel : Out of Range | "CANCEL CODE" by setting the cruise control outside permitted vehicle speed / ON or OFF | ON: "CANCEL CODE" detected OFF: "CANCEL CODE" not detected |
Refer to "CANCEL CODE" Click here. |
| Cruise Cancel : Accel Angle | "CANCEL CODE" by accelerator pedal operation / ON or OFF | ON: "CANCEL CODE" detected OFF: "CANCEL CODE" not detected |
Refer to "CANCEL CODE" Click here. |
| Cruise Cancel : Keeping Vehicle Speed | "CANCEL CODE" by inability to maintain vehicle speed / ON or OFF | ON: "CANCEL CODE" detected OFF: "CANCEL CODE" not detected |
Refer to "CANCEL CODE" Click here. |
| Cruise Cancel : VSC/TRC Operation | "CANCEL CODE" by VSC/TRC operation / ON or OFF | ON: "CANCEL CODE" detected OFF: "CANCEL CODE" not detected |
Refer to "CANCEL CODE" Click here. |
| Cruise Cancel : ABS/VSC Abnormal | "CANCEL CODE" by ABS/VSC abnormality / ON or OFF | ON: "CANCEL CODE" detected OFF: "CANCEL CODE" not detected |
Refer to "CANCEL CODE" Click here. |
| Cruise Cancel : Meter Abnormal | "CANCEL CODE" by combination meter assembly abnormality / ON or OFF | ON: "CANCEL CODE" detected OFF: "CANCEL CODE" not detected |
Refer to "CANCEL CODE" Click here. |
| Cruise Cancel : Brake Switch Abnormal | "CANCEL CODE" by stop light switch assembly abnormality / ON or OFF | ON: "CANCEL CODE" detected OFF: "CANCEL CODE" not detected |
Refer to "CANCEL CODE" Click here. |
| Cruise Cancel : Neutral Switch Abnormal | "CANCEL CODE" by park/neutral position switch abnormality / ON or OFF | ON: "CANCEL CODE" detected OFF: "CANCEL CODE" not detected |
Refer to "CANCEL CODE" Click here. |
| Cruise Cancel : Vehicle Speed 2 | "CANCEL CODE" by abnormal vehicle speed change / ON or OFF | ON: "CANCEL CODE" detected OFF: "CANCEL CODE" not detected |
Refer to "CANCEL CODE" Click here. |
| Cruise Cancel : Engine Abnormal | "CANCEL CODE" by engine control system abnormality / ON or OFF | ON: "CANCEL CODE" detected OFF: "CANCEL CODE" not detected |
Refer to "CANCEL CODE" Click here. |
| Cruise Cancel : Switch Related to Cruise Control | "CANCEL CODE" by cruise control main switch abnormality / ON or OFF | ON: "CANCEL CODE" detected OFF: "CANCEL CODE" not detected |
Refer to "CANCEL CODE" Click here. |
| Cruise Cancel : Brake Switch Abnormal(Memory) | "Cruise Cancel : Brake Switch Abnormal" is detected / ON or OFF | ON: "CANCEL CODE" detected OFF: "CANCEL CODE" not detected |
Refer to "CANCEL CODE" Click here. |
| Cruise Cancel : Neutral Switch Abnormal(Memory) | "Cruise Cancel : Neutral Switch Abnormal" is detected / ON or OFF | ON: "CANCEL CODE" detected OFF: "CANCEL CODE" not detected |
Refer to "CANCEL CODE" Click here. |
| Cruise Cancel : Vehicle Speed 2(Memory) | "Cruise Cancel : Vehicle Speed 2" is detected / ON or OFF | ON: "CANCEL CODE" detected OFF: "CANCEL CODE" not detected |
Refer to "CANCEL CODE" Click here. |
| Cruise Cancel : Engine Abnormal(Memory) | "Cruise Cancel : Engine Abnormal" is detected / ON or OFF | ON: "CANCEL CODE" detected OFF: "CANCEL CODE" not detected |
Refer to "CANCEL CODE" Click here. |
| Cruise Cancel : Switch Related to CCS(Memory) | "Cruise Cancel : Switch Related to CCS" is detected / ON or OFF | ON: "CANCEL CODE" detected OFF: "CANCEL CODE" not detected |
Refer to "CANCEL CODE" Click here. |
| Cruise Cancel : ECT Abnormal | "CANCEL CODE" by automatic transmission system / ON or OFF | ON: "CANCEL CODE" detected OFF: "CANCEL CODE" not detected |
Refer to "CANCEL CODE" Click here. |
| Brake Cancel Switch | Stop light switch signal / ON or OFF | ON: Brake pedal depressed OFF: Brake pedal released |
- |
PERFORM ACTIVE TEST
Tech Tips
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Select the following menu items: Body Electrical / Combination Meter / Active Test.
Perform "Active Test" according to the display on GTS.
Tech Tips
The ignition switch must be turned on to proceed with the Active Test using the GTS.
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Indicat. Lamp Cruise | Cruise control indicator light | Cruise control indicator light (illuminated in green) ON / OFF | - |
| Indicat. SET | Cruise control SET indicator light | Cruise control SET indicator light ON / OFF | - |
| Cruise Warning | Cruise control indicator light | Cruise control indicator light (illuminated in amber) ON / OFF | - |