IGNITION SWITCH INSTALLATION

PROCEDURE

1. INSTALL IGNITION OR STARTER SWITCH ASSEMBLY

   
   

   1. Install the 2 screws, and install the ignition or starter switch.

   2. Connect the connector.

2. INSTALL UPPER STEERING COLUMN COVER

   Click here

3. INSTALL LOWER STEERING COLUMN COVER

   Click here

4. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIR BAG ASSEMBLY (w/ Knee Airbag)

   Click here

5. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/o Knee Airbag)

   Click here

6. INSTALL UPPER INSTRUMENT PANEL METER ORNAMENT

   Click here

7. INSTALL METER HOOD SUB-ASSEMBLY

   Click here

8. INSTALL INSTRUMENT PANEL ORNAMENT (w/ Large Ornament Panel)

   Click here

9. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Large Ornament Panel)

   Click here

10. INSTALL INSTRUMENT SIDE PANEL LH

    Click here