INJECTOR DRIVER INSTALLATION

PROCEDURE


  1. INSTALL INJECTOR DRIVER

    Note


    • Be careful not to drop or strike the injector driver.

    • The injector driver is grounded at the bolt and the nut. To ensure that it is grounded, clean all oil and foreign matter from the installation areas of the injector driver and engine before installing the injector driver.


    1. Install the injector driver with the 3 bolts.

      Torque:
      6.4 N*m  { 65 kgf*cm, 57 in.*lbf }
    2. A004J9IE03
      Text in Illustration
      *1 Lock Lever
      A004I9S Lock with Connector
      A004KUZ Normal Connector

      Connect the 4 connectors to the injector driver. Move the lock levers in the direction indicated by the arrow to lock the 3 connectors.

  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Click here