PURGE VALVE REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    for Resin Intake Manifold:

    Click here

  2. REMOVE PURGE VALVE


    1. A004IBCE02
      Text in Illustration
      *A for Resin Intake Manifold
      *B for Aluminum Intake Manifold

      Remove the nut which holds the purge valve onto the intake manifold.

    2. Disconnect the purge valve connector.

    3. for Resin Intake Manifold


      1. A004J3FE03
        Text in Illustration
        *1 air pressure sensor assembly connector
        *2 No. 2 ventilation hose

        Disconnect the manifold absolute pressure sensor connector.

      2. Disconnect the No. 2 ventilation hose.

    4. A004JORE03
      Text in Illustration
      *A for Resin Intake Manifold
      *B for Aluminum Intake Manifold
      *1 No. 1 fuel vapor feed hose
      *2 No. 2 fuel vapor feed hose

      Disconnect the No. 1 fuel vapor feed hose and No. 2 fuel vapor feed hose, and remove the purge valve with the joint wire harness.

    5. A004HKNE02
      Text in Illustration
      *A for Resin Intake Manifold
      *B for Aluminum Intake Manifold

      Remove the joint wire harness from the purge valve assembly.