FRONT CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE


  1. REMOVE FAN AND GENERATOR V BELT

    Click here

  2. REMOVE CRANKSHAFT PULLEY


    1. A004JJME01
      Text in Illustration
      *1 Claw

      Install SST to the crankshaft pulley.

      SST
      09213-80010   ( 90179-10016, 09213-08010, 09213-08110 )

      Tech Tips

      Position the projections on SST in the direction as shown in the illustration to prevent SST from separating from the crankshaft pulley.

    2. A004I8KE01
      Text in Illustration
      *a Hold
      *b Turn

      Using SST, hold the crankshaft pulley and loosen the crankshaft pulley set bolt.

      SST
      09213-80010   ( 90179-10016, 09213-08010, 09213-08110 )

    3. Remove the crankshaft pulley.

    4. A004JAP

      Remove the O-ring and crankshaft pulley spacer.

  3. REMOVE TIMING CHAIN OR BELT COVER OIL SEAL

    A004IPWE01
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver with its tip wrapped in protective tape, pry out the timing chain or belt cover oil seal.

      Note

      After the removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.

      Tech Tips

      Tape the screwdriver tip before use.