CAMSHAFT POSITION SENSOR REMOVAL

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Click here

  2. REMOVE VVT SENSOR (for Intake Side of Bank 1)


    1. A004I5M

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor.

    3. Remove the O-ring from the VVT sensor.

  3. REMOVE VVT SENSOR (for Exhaust Side of Bank 1)


    1. A004JCA

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor.

    3. Remove the O-ring from the VVT sensor.

  4. REMOVE VVT SENSOR (for Intake Side of Bank 2)


    1. A004IDC

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor.

    3. Remove the O-ring from the VVT sensor.

  5. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  6. REMOVE VVT SENSOR (for Exhaust Side of Bank 2)


    1. A004III

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor.

    3. Remove the O-ring from the VVT sensor.