ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

   
   

   1. Install a new gasket to the engine coolant temperature sensor.

   2. Using a 19 mm union nut wrench, install the engine coolant temperature sensor to the cylinder head sub-assembly.

      Torque:

      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

      Note

      
      

      • If a component has been dropped or subjected a strong impact, replace it.

      • Use the torque value compensation formula to calculate the torque value for use when a torque wrench is combined with a tool such as a union nut wrench Click here.

   3. Connect the engine coolant temperature sensor connector.

2. INSTALL INTAKE MANIFOLD

   Click here

3. FILL ENGINE COOLANT

   Click here

4. INSPECT COOLANT LEAK

   Click here