IGNITION COIL AND SPARK PLUG REMOVAL

PROCEDURE


  1. SET HOOD SUB-ASSEMBLY

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Click here

  3. REMOVE FRONT SUSPENSION UPPER TO COWL BRACE SUB-ASSEMBLY LH

    Click here

  4. REMOVE FRONT SUSPENSION UPPER TO COWL BRACE SUB-ASSEMBLY RH

    Click here

  5. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE

    Click here

  6. DISCONNECT ENGINE WIRE


    1. A004KOX

      Disengage the 4 clamps, and disconnect the engine wire.

    2. A004IL5

      Disengage the 3 clamps and bolt, and disconnect the engine wire.

  7. REMOVE CLUTCH FLEXIBLE HOSE BRACKET (for RHD with Manual Transmission)


    1. A004JGX

      Remove the clip, and disconnect the clutch flexible tube.

    2. A004KIK

      remove the bolt, and disconnect the clutch flexible hose bracket.

  8. REMOVE EXHAUST MANIFOLD

    Click here

  9. INSTALL ENGINE HANGER

    Click here

  10. SET SST


    1. A004HGD

      Tie the front exhaust pipe sub-assembly onto the front suspension cross member sub-assembly using rope.

      Tech Tips

      This operation is necessary in order to prevent the front exhaust pipe sub-assembly from falling off.

    2. A004IS8

      Remove the 2 nuts.

    3. Install the engine hanger with the bolt. Click here

      Torque:
      33 N*m  { 337 kgf*cm, 24 ft.*lbf }

    4. Hoist the engine assembly up with an engine sling device and a mini crane.

    5. A004HJHE02

      Install the SST to between the engine mount and front.

      SST
      09250-53010

  11. REMOVE INJECTOR COVER (for LH Side)


    1. A004HMJ

      Disengage the clamp, and disconnect the fuel hoses.

    2. A004HHX

      Remove the 2 bolts and injector cover.

  12. REMOVE IGNITION COIL ASSEMBLY (for Bank 2)


    1. A004J74

      Disconnect the 2 ignition coil connectors from the ignition coil assembly.

    2. Remove the 2 bolts and remove the 2 ignition coils.

  13. REMOVE SPARK PLUG (for Bank 2)


    1. A004JTW

      Remove the 2 spark plugs.

  14. REMOVE INJECTOR DRIVER

    Click here

  15. REMOVE IGNITION COIL ASSEMBLY (for Bank 1)


    1. A004JP9

      Disconnect the 2 ignition coil connectors from the ignition coil assembly.

    2. Remove the 2 bolts and remove the 2 ignition coils.

  16. REMOVE SPARK PLUG (for Bank 1)


    1. A004KJH

      Remove the 2 spark plugs.