SHIFT PADDLE SWITCH INSPECTION

PROCEDURE


  1. INSPECT SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)


    1. A004IQFE01
      Text in Illustration
      *a

      Component without harness connected

      (Shift Paddle Switch (transmission shift switch assembly))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 3

      Pull continuously "+"

      (Up shift)

      		 Below 1 Ω
      Release "+" 10 Ω or higher
      1 - 4

      Pull continuously "-"

      (Down shift)

      		 Below 1 Ω
      Release "-" 10 Ω or higher

      If the resistance value are not as specified, replace the shift paddle switch (transmission shift switch assembly).