VALVE BODY ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL TRANSMISSION VALVE BODY ASSEMBLY


    1. A004H34E06
      Text in Illustration
      *1 Check Ball Body and Compression Spring
      *2 Accumulator Piston

      Install the check ball body and the compression spring.

    2. Check the accumulator pistons, check ball body and the compression spring shown in the illustration.

    3. Connect the manual valve connecting rod sub-assembly to the manual valve lever sub-assembly.

    4. A004IBKE09

      Install the transmission valve body assembly with the 19 bolts.

      Torque:
      11 N*m  { 112 kgf*cm, 8 ft.*lbf }
      Bolt Length
      Bolt Bolt Length
      A 25 mm (0.984 in.)
      B 36 mm (1.42 in.)
      C 45 mm (1.77 in.)
      D 50 mm (1.97 in.)

    5. Install the detent spring and the detent spring cover with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  2. CONNECT TRANSMISSION WIRE

    Click here

  3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY

    Click here

  4. INSTALL TRANSMISSION OIL CLEANER MAGNET

    Click here

  5. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY

  6. INSTALL FRONT EXHAUST PIPE ASSEMBLY

    Click here

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Click here

  8. ADD AUTOMATIC TRANSMISSION FLUID LEVEL

    Click here

  9. INSPECT AUTOMATIC TRANSMISSION FLUID LEVEL

  10. RESET CHECK RESET MEMORY

    Click here

  11. INSPECT EXHAUST GAS LEAK

    Click here