OIL PUMP REASSEMBLY

PROCEDURE


  1. INSTALL FRONT OIL PUMP OIL SEAL


    1. A004JA3E01

      Using SST and a hammer, install a new front oil pump oil seal.

      SST
      09350-30020   ( 09351-32140 )
      Drive in depth
      -0.2 to 0.2 mm (-0.00787 to 0.00787 in.)

    2. Coat the lip of the front oil pump oil seal with MP grease.

  2. FIX FRONT OIL PUMP BODY SUB-ASSEMBLY


    1. Place the front oil pump body sub-assembly on the torque converter assembly.

  3. INSTALL CLUTCH DRUM OIL SEAL RING


    1. A004H7Y

      Coat 3 new clutch drum oil seal rings with ATF.

    2. Squeeze the ends of the 3 clutch drum oil seal rings so that the gap distance becomes 8 mm (0.315 in.) or less, and then install them to the stator shaft groove.

      Note

      Do not expand the ring ends excessively.

      Tech Tips

      After installing the clutch drum oil seal rings, check that they rotate smoothly.

  4. INSPECT OIL PUMP DRIVE GEAR ROTATION

    Click here

  5. INSTALL FRONT OIL PUMP BODY O-RING


    1. A004HVR

      Coat a new front oil pump body O-ring with ATF and install it to the oil pump assembly.