TRANSMISSION WIRE INSTALLATION

PROCEDURE


  1. INSTALL TRANSMISSION WIRE


    1. Coat a new O-ring with ATF and install it to the transmission wire.

    2. Install the transmission wire with the bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }
    3. A004IXM

      Connect the transmission wire connector.

      Tech Tips

      Push up the lever until the claw of the transmission wire connector makes a connection sound.

  2. CONNECT TRANSMISSION WIRE


    1. Connect the 9 solenoid valve connectors.

    2. Coat the ATF temperature sensor O-ring with ATF.

    3. Install the ATF temperature sensor and the temperature sensor clamp with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    4. Engage the wire harness clamp.

    5. Install the valve body wire harness clamp with the bolt.

      Torque:
      6.4 N*m  { 65 kgf*cm, 57 in.*lbf }

  3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY


    1. Coat a new O-ring with ATF and install it to the valve body oil strainer assembly.

    2. Install the valve body oil strainer assembly with the 4 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  4. INSTALL TRANSMISSION OIL CLEANER MAGNET


    1. A004J3LE04
      Text in Illustration
      *1 Transmission Oil Cleaner Magnet

      Install the 3 transmission oil cleaner magnets to the automatic transmission oil pan sub-assembly as shown in the illustration.

  5. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY


    1. Install a new automatic transmission oil pan gasket and the automatic transmission oil pan sub-assembly with the 20 bolts.

      Torque:
      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

      Note

      Remove the gasket and be careful not to spill oil on the contacting surfaces of the transmission case and oil pan.

  6. INSTALL AUTOMATIC TRANSMISSION ASSEMBLY

    Click here