GRILLE SHUTTER REMOVAL


  1. REMOVE ENGINE ROOM SIDE COVER


    1. A01FSOM

      Remove the 4 clips and engine room side cover.

  2. REMOVE COOL AIR INTAKE DUCT SEAL


    1. A01FQQK

      Remove the 7 clips and cool air intake duct seal.

  3. REMOVE FRONT BUMPER COVER


    1. for Sport Package:

      Click here

    2. except Sport Package:

      Click here

  4. REMOVE FRONT BUMPER ENERGY ABSORBER


    1. Remove the front bumper energy absorber.

      A01FQBIE01
      Text in Illustration
      *A for Type A *B for Type B

  5. REMOVE ENGINE UNDER COVER


    1. A01FVWF

      Remove the 13 screws, 3 clips and engine under cover.

  6. REMOVE RADIATOR SUPPORT OPENING COVER


    1. A01FTYX

      Remove the 4 clips, 2 bolts and radiator support opening cover.

  7. REMOVE RADIATOR SHUTTER SUB-ASSEMBLY


    1. Close the radiator shutter sub-assembly.


      1. Connect the GTS to the DLC3 and turn the power switch on (IG).

      2. Enter the following menus: Body Electrical / Grille Shutter / Active Test / Shutter Closing Operation Lock Detection. Then, perform Close or OFF.

        Note

        The radiator shutter sub-assembly cannot be removed if it has not been closed.

      3. Check that the radiator shutter sub-assembly is closed and disconnect the radiator shutter sub-assembly connector.

      4. Turn the power switch off.

    2. A01FUXK

      Using a clip remover, detach the clamp and remove the thermistor.

    3. A01FRRW

      Remove the 4 bolts.

    4. A01FVJL

      Using a clip remover, detach the 2 clips and remove the radiator shutter.