REAR SPOILER INSTALLATION


  1. INSTALL REAR SPOILER SUB-ASSEMBLY

    Tech Tips

    When installing the rear spoiler, heat the vehicle body and rear spoiler using a heat light.

    Standard
    Item Temperature
    Vehicle Body 40 to 60°C (104 to 140°F)
    Rear Spoiler 20 to 30°C (68 to 86°F)

    Note

    Do not heat the vehicle body or rear spoiler excessively.


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new rear spoiler.


      1. Using a heat light, heat the vehicle body and a new rear spoiler.

      2. Remove the peeling paper from the face of the rear spoiler.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Attach the 5 clips to install the rear spoiler.

        Tech Tips

        Press the rear spoiler firmly to install it.

    3. Install the 2 nuts.

  2. INSTALL LUGGAGE COMPARTMENT DOOR COVER


    1. Install the luggage compartment door cover with the 15 clips.

  3. INSTALL SWITCH BEZEL (w/ Power Trunk Lid System)


    1. Attach the 2 claws to install the switch bezel.

  4. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP


    1. Install the luggage compartment door assist grip with the 2 screws.

    2. Attach the 2 claws and close the cover.

  5. INSTALL LUGGAGE COMPARTMENT DOOR INSIDE HANDLE (w/ Handle)


    1. Connect the luggage compartment door inside handle to the luggage door lock control cable sub-assembly.

  6. INSTALL LUGGAGE LOCK CONTROL CABLE PLATE (w/ Handle)


    1. Attach the 2 claws to install the luggage lock control cable plate.