REAR BUMPER REMOVAL


  1. REMOVE REAR BUMPER NO. 1 PLATE


    1. A01FR8VE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 2 claws and remove the rear bumper No. 1 plate.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE REAR BUMPER COVER


    1. A01FQOQ

      Remove the 4 clips and 2 screws.

    2. A01FS8V

      Remove the screw, and then remove the rear bumper seal bracket.

      Tech Tips

      Use the same procedure for both screws and rear bumper seal brackets.

    3. A01FRHU

      Remove the 2 screws.

    4. A01FS1CE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the rear bumper cover.

    5. Detach the 20 claws and remove the rear bumper cover.

    6. w/ LEXUS Parking Assist-sensor System:


      1. Disconnect the connector of the No. 3 luggage room wire.

        A01FQ64

  3. REMOVE REAR BUMPER ENERGY ABSORBER


    1. Remove the rear bumper energy absorber.

      A01FS5TE01
      Text in Illustration
      *A for Type A *B for Type B

  4. REMOVE REAR BUMPER NO. 1 REINFORCEMENT


    1. Remove the 8 bolts and rear bumper No. 1 reinforcement.

      A01FUV8E01
      Text in Illustration
      *A for Type A *B for Type B

  5. REMOVE REAR BUMPER NO. 1 SIDE SUPPORT LH


    1. A01FTF6

      Remove the grommet.

    2. A01FQTJ

      Remove the 2 screws and rear bumper No. 1 side support.

  6. REMOVE REAR BUMPER NO. 1 SIDE SUPPORT RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. REMOVE REAR BUMPER LOWER SIDE RETAINER RH


    1. A01FUOA

      Remove the clip.

    2. Detach the claw and remove the rear bumper lower side retainer.

  8. REMOVE REAR BUMPER NO. 2 SIDE SUPPORT LH


    1. A01FQMD

      Detach the 4 clips.

    2. A01FSCY

      Detach the 6 claws and remove the rear bumper No. 2 side support.

  9. REMOVE REAR BUMPER NO. 2 SIDE SUPPORT RH

    Tech Tips

    Use the same procedure described for the LH side.

  10. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH

    Click here

  11. REMOVE REAR COMBINATION LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  12. REMOVE REAR BUMPER UPPER RETAINER LH


    1. A01FVJQ

      Detach the clamp of the wire harness.

    2. Detach the 2 clips and remove the rear bumper upper retainer.

  13. REMOVE REAR BUMPER UPPER RETAINER RH


    1. Detach the 2 clips and remove the rear bumper upper retainer.