STOP LIGHT SWITCH ON-VEHICLE INSPECTION


  1. INSPECT STOP LIGHT SWITCH ASSEMBLY


    1. A01FRRVE01
      Text in Illustration
      *a

      Component without harness connected

      (Stop Light Switch Assembly)

      Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      Tester Connection Switch Condition Specified Condition
      A5-2 (L)- Body ground Brake pedal released Below 1 V
      Brake pedal pushed 11 to 14 V

      If the result is not as specified, replace the stop light switch assembly.