REAR COMBINATION LIGHT ASSEMBLY INSPECTION


  1. INSPECT REAR COMBINATION LIGHT ASSEMBLY LH


    1. A01FQUKE03
      Text in Illustration
      *a

      Component without harness connected

      (Rear Combination Light Assembly LH)

      Apply auxiliary battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition

      Auxiliary battery positive (+) → Terminal 1 (STP)

      Auxiliary battery negative (-) → Terminal 4 (E)

      		 Stop light illuminates

      Auxiliary battery positive (+) → Terminal 3 (TL)

      Auxiliary battery negative (-) → Terminal 4 (E)

      		 Taillight illuminates

      If the result is not as specified, replace the rear combination light assembly LH.

  2. INSPECT REAR COMBINATION LIGHT ASSEMBLY RH


    1. A01FQUKE03
      Text in Illustration
      *a

      Component without harness connected

      (Rear Combination Light Assembly RH)

      Apply auxiliary battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition

      Auxiliary battery positive (+) → Terminal 1 (STP)

      Auxiliary battery negative (-) → Terminal 4 (E)

      		 Stop light illuminates

      Auxiliary battery positive (+) → Terminal 3 (TL)

      Auxiliary battery negative (-) → Terminal 4 (E)

      		 Taillight illuminates

      If the result is not as specified, replace the rear combination light assembly RH.