SIDE TURN SIGNAL LIGHT ASSEMBLY INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY LH


    1. Attach the pin to install the side turn signal light assembly LH.

  2. INSTALL NO. 2 OUTER MIRROR COVER LH


    1. Connect the connector.

    2. Attach the 2 guides.

    3. Attach the 2 guides , 2 claws and install the visor.

    4. Install the No. 2 outer mirror cover LH with the 5 screws.

  3. INSTALL OUTER MIRROR LH


    1. w/ Blind Spot Monitor:


      1. Connect the 4 connectors.

      2. Attach the 2 clamps.

    2. w/o Blind Spot Monitor:


      1. Connect the 3 connectors.

      2. Attach the clamp.

    3. A01FRFB

      Attach the 2 claws on the upper part of the outer mirror LH to the outer rear view mirror assembly LH.

    4. A01FU7S

      Attach the 2 claws on the lower part of the outer mirror LH to the outer rear view mirror assembly LH.