RAIN SENSOR REMOVAL


  1. REMOVE FRONT ROOF TOP GARNISH


    1. A01FTXH

      Disengage the 5 claws and guide and disconnect the front roof top garnish as shown in the illustration.

  2. REMOVE RAIN SENSOR


    1. A01FUMSE01
      Text in Illustration
      *1 Stopper

      Release the stopper by pulling the stopper down and disconnect the rain sensor as shown in the illustration.

    2. A01FVSA

      Disconnect the connector.

  3. CLEAN WINDSHIELD GLASS

    Tech Tips


    • Rain sensor tape is reusable. Only replace the tape if it is damaged or contaminated.

    • Check that there is no rain sensor tape residue remaining on the windshield glass. If there is, remove the residue before installing the rain sensor.