HEADLIGHT CLEANER SWITCH INSPECTION


  1. INSPECT INTEGRATION CONTROL AND PANEL ASSEMBLY (HEADLIGHT CLEANER SWITCH)

    A01FSPOE04
    Text in Illustration
    *a

    Component without harness connected

    (Integration Control and Panel Assembly)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      4 (B) - 12 (L) Headlight cleaner switch on Below 1 Ω
      Headlight cleaner switch off 10 kΩ or higher

    2. Connect an auxiliary battery positive (+) lead to terminal 3 (ILL+) and a negative (-) lead to terminal 6 (ILL-).

    3. Check that the headlight cleaner switch illumination comes on.

      OK
      The headlight cleaner switch illumination comes on.

      If the result is not as specified, replace the integration control and panel assembly.