WASHER NOZZLE ON-VEHICLE INSPECTION


  1. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. With the engine running, check the position that the washer fluid hits the windshield.

      Standard
      Washer fluid hits the windshield in the areas shown in the illustration.
      A01FR15E01
      Text in Illustration
      *a Upper Limit *b Standard
      *c Lower Limit - -
      Standard Clearance
      Area Measurement Area Measurement
      A 120 mm (4.72 in.) B 405 mm (15.9 in.)
      C 75 mm (2.95 in.) D 260 mm (10.2 in.)

      Tech Tips

      If the result is not as specified, replace the washer nozzle sub-assembly.