POWER MIRROR CONTROL SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / (desired system) / Data List.

    5. According to the display on the GTS, read the Data List.

      Master Switch
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Mirror Selection SW (L) Mirror select switch signal for LH mirror / ON or OFF

      ON: Mirror select switch in L position

      OFF: Mirror select switch off or in R position

      		 -
      Mirror Selection SW (R) Mirror select switch signal for RH mirror / ON or OFF

      ON: Mirror select switch in R position

      OFF: Mirror select switch off or in L position

      		 -
      Mirror Position SW (L) Mirror adjust switch signal (Left) / ON or OFF

      ON: Mirror adjust switch pressed left

      OFF: Mirror adjust switch not pressed left

      		 Check with the mirror select switch in the L or R position.
      Mirror Position SW (R) Mirror adjust switch signal (Right) / ON or OFF

      ON: Mirror adjust switch pressed right

      OFF: Mirror adjust switch not pressed right

      		 Check with the mirror select switch in the L or R position.
      Mirror Position SW (Up) Mirror adjust switch signal (Up) / ON or OFF

      ON: Mirror adjust switch pressed up

      OFF: Mirror adjust switch not pressed up

      		 Check with the mirror select switch in the L or R position.
      Mirror Position SW (Dwn) Mirror adjust switch signal (Down) / ON or OFF

      ON: Mirror adjust switch pressed down

      OFF: Mirror adjust switch not pressed down

      		 Check with the mirror select switch in the L or R position.
      Outer Mirror Fold SW* Retractable outer mirror switch signal / ON or OFF

      ON: Retractable outer mirror switch in retract position

      OFF: Retractable outer mirror switch not in retract position

      		 -
      Auto Mirror SW* Retractable outer mirror switch signal / ON or OFF

      ON: Retractable outer mirror switch in AUTO position

      OFF: Retractable outer mirror switch not in AUTO position

      		 -

      • *: w/ Retract Mirror

      Front Left Door
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Seat Memory Switch1*1 Seat memory switch M1 signal / ON or OFF

      ON: Seat memory switch M1 on

      OFF: Seat memory switch M1 off

      		 -
      Seat Memory Switch2*1 Seat memory switch M2 signal / ON or OFF

      ON: Seat memory switch M2 on

      OFF: Seat memory switch M2 off

      		 -
      Seat Memory Switch3*1 Seat memory switch M3 signal / ON or OFF

      ON: Seat memory switch M3 on

      OFF: Seat memory switch M3 off

      		 -
      Seat Memory Set SW*1 Seat memory switch SET signal / ON or OFF

      ON: Seat memory switch SET on

      OFF: Seat memory switch SET off

      		 -
      Mirror Memory No.1 No. 1 mirror position memorized / OFF or ON

      ON: Memorized

      OFF: Not memorized

      		 -
      Mirror Memory No.2 No. 2 mirror position memorized / OFF or ON

      ON: Memorized

      OFF: Not memorized

      		 -
      Mirror Memory No.3 No. 3 mirror position memorized / OFF or ON

      ON: Memorized

      OFF: Not memorized

      		 -
      Mirror Memory No.4 No. 4 mirror position memorized / OFF or ON

      ON: Memorized

      OFF: Not memorized

      		 -
      Mirror Memory No.5 No. 5 mirror position memorized / OFF or ON

      ON: Memorized

      OFF: Not memorized

      		 -
      Mirror Memory No.6 No. 6 mirror position memorized / OFF or ON

      ON: Memorized

      OFF: Not memorized

      		 -
      Mirror Memory(Rev) No.1 Reverse shift-linked mirror position memorized / OFF or ON

      ON: Memorized

      OFF: Not memorized

      		 -
      Mirror Vertical Sensor Vol Vertical mirror position / MIN: 0, MAX: 4.98 V Within range of 0 to 4.98 V -
      Mirror Fold Detect*2 Condition of retractable outer mirror / Normal or Error

      Normal: Retractable outer mirror is normal

      Error: Retractable outer mirror is malfunction

      		 -

      • *1: for LHD

      • *2: w/ Retract Mirror

      Front Right Door
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Seat Memory Switch1*1 Seat memory switch M1 signal / ON or OFF

      ON: Seat memory switch M1 on

      OFF: Seat memory switch M1 off

      		 -
      Seat Memory Switch2*1 Seat memory switch M2 signal / ON or OFF

      ON: Seat memory switch M2 on

      OFF: Seat memory switch M2 off

      		 -
      Seat Memory Switch3*1 Seat memory switch M3 signal / ON or OFF

      ON: Seat memory switch M3 on

      OFF: Seat memory switch M3 off

      		 -
      Seat Memory Set SW*1 Seat memory switch SET signal / ON or OFF

      ON: Seat memory switch SET on

      OFF: Seat memory switch SET off

      		 -
      Mirror Memory No.1 No. 1 mirror position memorized / OFF or ON

      ON: Memorized

      OFF: Not memorized

      		 -
      Mirror Memory No.2 No. 2 mirror position memorized / OFF or ON

      ON: Memorized

      OFF: Not memorized

      		 -
      Mirror Memory No.3 No. 3 mirror position memorized / OFF or ON

      ON: Memorized

      OFF: Not memorized

      		 -
      Mirror Memory No.4 No. 4 mirror position memorized / OFF or ON

      ON: Memorized

      OFF: Not memorized

      		 -
      Mirror Memory No.5 No. 5 mirror position memorized / OFF or ON

      ON: Memorized

      OFF: Not memorized

      		 -
      Mirror Memory No.6 No. 6 mirror position memorized / OFF or ON

      ON: Memorized

      OFF: Not memorized

      		 -
      Mirror Memory(Rev) No.1 Reverse shift-linked mirror position memorized / OFF or ON

      ON: Memorized

      OFF: Not memorized

      		 -
      Mirror Vertical Sensor Vol Vertical mirror position / MIN: 0, MAX: 4.98 V Within range of 0 to 4.98 V -
      Mirror Fold Detect*2 Condition of retractable outer mirror / Normal or Error

      Normal: Retractable outer mirror is normal

      Error: Retractable outer mirror is malfunction

      		 -

      • *1: for RHD

      • *2: w/ Retract Mirror

  2. ACTIVE TEST

    Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / (desired system) / Active Test.

    5. According to the display on the GTS, perform the Active Test.

      Front Left Door
      Tester Display Test Part Control Range Diagnostic Note
      Mirror Up/Down Mirror vertical operation Up/Down -
      Mirror Right/Left Mirror horizontal operation Right/Left -
      Mirror Fold/Return*1 Mirror retract operation Fold/Return -
      Mirror Heater*2 Mirror heater operation ON/OFF -

      • *1: w/ Retract Mirror

      • *2: w/ Mirror Heater

      Front Right Door
      Tester Display Test Part Control Range Diagnostic Note
      Mirror Up/Down Mirror vertical operation Up/Down -
      Mirror Right/Left Mirror horizontal operation Right/Left -
      Mirror Fold/Return*1 Mirror retract operation Fold/Return -
      Mirror Heater*2 Mirror heater operation ON/OFF -

      • *1: w/ Retract Mirror

      • *2: w/ Mirror Heater