POWER MIRROR CONTROL SYSTEM OPERATION CHECK


  1. CHECK REMOTE CONTROL MIRROR FUNCTION


    1. Turn the power switch on (IG).

    2. With the mirror select switch set to L, check that the mirror surface moves up, down, left and right normally.

    3. With the mirror select switch set to R, check that the mirror surface moves up, down, left and right normally.

  2. CHECK POWER RETRACTABLE MIRROR FUNCTION (w/ Retract Mirror)


    1. Turn the power switch on (IG).

    2. At each outer mirror actuator position, check the retractable mirror operation when operating the retractable outer mirror switch.


      1. A01FVTQ

        Move the mirrors to the driving position.

      2. Turn the retractable outer mirror switch to the retract position.

      3. Check that the right and left outer mirror actuators move from the driving position to the retracted position.

      4. A01FSCN

        Move the mirrors to the driving position.

      5. Move one of the outer mirror actuators to the forward position by hand.

      6. Turn the retractable outer mirror switch to the retract position.

      7. Check that the outer mirror actuator in the forward position moves to the retracted position, and check that the other mirror also moves to the retracted position.

      8. A01FSTZ

        Move the outer mirror actuators to driving position.

      9. Move one of the outer mirror actuators to the retracted position by hand.

      10. Turn the retractable outer mirror switch to the retract position.

      11. Check that the outer mirror actuator in the driving position moves to the retracted position.

      12. A01FTWF

        Move the mirrors to the retracted position.

      13. Turn the retractable outer mirror switch to the driving position.

      14. Check that the right and left mirrors move from the retracted position to the driving position.

      15. A01FR6P

        Move the mirrors to the retracted position.

      16. Move one of the outer mirror actuators to the driving position by hand.

      17. Turn the retractable outer mirror switch to the driving position.

      18. Check that the retracted outer mirror actuator moves to the driving position.

    3. Check the operation of the outer mirror actuator according to retract switch operations and power switch condition.


      1. When the outer mirror actuator is operating, turn the power switch off and check that the mirror operation does not stop and continues until the operation has finished.

      2. This time, turn the power switch on (ACC) and press the retract switch. Check that the outer mirror actuator operates in the opposite direction.

    4. Check the operation of the outer mirror actuator when it is blocked by an obstacle.


      1. When the outer mirror actuator is moving to the retracted or driving position, block the outer mirror actuator by hand. Check that the mirror stops moving.

      2. With the outer mirror actuator stopped partway, push the retract switch. Check that the outer mirror actuator moves in the opposite direction.

  3. CHECK AUTO ELECTRIC RETRACT FUNCTION (w/ Retract Mirror)

    Tech Tips

    The default setting is Door Lock. If necessary, the function must be set to ACC through the customize function.


    1. With the power switch off and the retractable outer mirror switch AUTO, when the doors are unlocked through the entry, wireless or key-linked function, check that the outer mirror actuators move from the retracted position to the driving position, and then stop in the driving position.

    2. With the power switch off and the retractable outer mirror switch AUTO, when the doors are locked through the entry, wireless or key-linked function, check that the outer mirror actuators move from the driving position to the retracted position, and then stop in the retracted position.

    3. When the power switch is on (ACC) and then turned off while the retractable outer mirror switch is AUTO, check that both outer mirror actuators automatically move from the driving position to the retracted position.

    4. When the power switch is off and then turned on (ACC) while the retractable outer mirror switch is AUTO, check that both outer mirror actuators automatically move from the retracted position to the driving position.

  4. CHECK MEMORY AND MIRROR RESTORING OPERATION

    A01FSJKE01
    Text in Illustration
    *1 SET Switch *2 M1 Switch
    *3 M2 Switch *4 M3 Switch

    Tech Tips

    If the M1 switch, M2 switch and M3 switch are simultaneously pressed while the SET switch is pressed and held, the seat position will not be stored.


    1. Turn the power switch on (IG) and move the shift lever to P.

    2. Check the M1 switch.


      1. A01FTDOE02
        Text in Illustration
        *a Turn to Left Fully

        Using the outer mirror switch, turn the mirror surface to the full left position.

      2. Check that the buzzer sounds for 0.5 seconds and the mirror surface position is memorized when the M1 switch is pressed within 3 seconds after the SET switch is pressed.

        Note


        • The mirror surface position will also be stored when the M1 switch is pressed after first pressing and holding the SET switch.

        • The mirror surface position will not be stored when the SET switch and M1 switch are pressed simultaneously.

        • The mirror surface position will not be stored when 2 or more of the memory switches are pressed simultaneously (for example, M1 and M2) after first pressing the SET switch.

      3. Using the outer mirror switch, turn the mirror surface to the full right position.

      4. Press the M1 switch.

      5. Check that the buzzer sounds for 0.1 seconds and the outer mirror automatically moves to the recorded full left position.

    3. Check the M2 switch.


      1. A01FR4CE02
        Text in Illustration
        *a Turn to Right Fully

        Using the outer mirror switch, turn the mirror surface to the full right position.

      2. Check that the buzzer sounds for 0.5 seconds and the mirror surface position is memorized when the M2 switch is pressed within 3 seconds after the SET switch is pressed.

        Note


        • The mirror surface position will also be stored when the M2 switch is pressed after first pressing and holding the SET switch.

        • The mirror surface position will not be stored when the SET switch and M2 switch are pressed simultaneously.

        • The mirror surface position will not be stored when 2 or more of the memory switches are pressed simultaneously (for example, M1 and M2) after first pressing the SET switch.

      3. Using the outer mirror switch, turn the mirror surface to the full left position.

      4. Press the M2 switch.

      5. Check that the buzzer sounds for 0.1 seconds and the outer mirror automatically moves to the recorded full right position.

    4. Check the M3 switch.


      1. A01FTDOE02
        Text in Illustration
        *a Turn to Left Fully

        Using the outer mirror switch, turn the mirror surface to the full left position.

      2. Check that the buzzer sounds for 0.5 seconds and the mirror surface position is memorized when the M3 switch is pressed within 3 seconds after the SET switch is pressed.

        Note


        • The mirror surface position will also be stored when the M3 switch is pressed after first pressing and holding the SET switch.

        • The mirror surface position will not be stored when the SET switch and M3 switch are pressed simultaneously.

        • The mirror surface position will not be stored when 2 or more of the memory switches are pressed simultaneously (for example, M2 and M3) after first pressing the SET switch.

      3. Using the outer mirror switch, turn the mirror surface to the full right position.

      4. Press the M3 switch.

      5. Check that the buzzer sounds for 0.1 seconds and the outer mirror automatically moves to the recorded full left position.

  5. CHECK REVERSE SHIFT-LINKED OPERATION OF MIRRORS


    1. Turn the power switch on (IG).

    2. Set the mirror select switch to L or R.

    3. Check that the mirror surface turns downward when the shift lever is moved to R.

    4. Check that the mirror surface position returns to the original position when one of the following conditions is met:


      • Shift lever is moved to any position other than R.

      • Mirror select switch is in the neutral position (off).

      • Power switch is turned off.

  6. CHECK REVERSE SHIFT-LINKED MIRROR POSITION MEMORIZATION FUNCTION


    1. Turn the power switch on (IG).

    2. Set the mirror select switch to L or R.

    3. Check that the mirror surface turns downward when the shift lever is moved to R.

    4. While the mirror is in the reverse shift-linked operation position, move the mirror to the desired position.

    5. Check that the mirror moves to its normal position when the shift lever is moved to a different position from R, and then moves back to the memorized position when the shift lever is moved to R again.

  7. CHECK MEMORY CALL FUNCTION


    1. Memory call function check.


      1. With a transmitter key recognition code registered:

        With the recognition code of the transmitter registered in memory, perform an entry unlock or wireless unlock operation. Open the driver door and check that the front seat, steering wheel (tilt & telescopic) and outer mirror surface position automatically move to the positions recorded in memory.

    2. Memory registration.


      1. Prepare by recording the driving position through the memory switch (M1, M2 or M3).

      2. With the power switch on (IG), press and hold both of the following: a memory switch (M1, M2 or M3) and manual door control switch (LOCK or UNLOCK). Continue holding the switches until the answer-back buzzer sounds once (0.5 seconds).

        Note

        Do not bring 2 or more keys into the vehicle.

    3. Memory erasure.


      1. With the power switch on (IG), press and hold both of the following: the memory SET switch and manual door control switch (LOCK or UNLOCK). Continue holding the switches until the answer-back buzzer sounds twice (0.1 seconds each time).

        Note

        Do not bring 2 or more keys into the vehicle.

  8. CHECK MEMORY CALL EMERGENCY STOP FUNCTION


    1. While a memory call function is operating, check that any one of the following actions will stop the memory call operation: 1) pressing the SET, M1, M2 or M3 switch, 2) moving the shift lever to R, 3) moving the mirror surface manually, or 4) moving the mirror surface to the uppermost, lowermost, leftmost or rightmost position.

  9. CHECK MIRROR HEATER (w/ Mirror Heater)


    1. Turn the power switch on (IG).

    2. Check that pressing the rear window defogger switch illuminates the indicator and warms the mirror surface.

    3. Check that after approximately 15 minutes, the indicator light turns off and the mirror heater deactivates.

      Tech Tips

      There is a timer extension function which can operate the mirror heater system for up to an additional 45 minutes.

  10. CHECK AUTOMATIC GLARE-RESISTANT EC MIRROR FUNCTION (w/ Automatic Glare-resistance EC Mirror)


    1. Check that the automatic glare-resistant EC mirror function of the outer rear view mirror assembly operates when the automatic glare-resistant function of the inner rear view mirror assembly is operating.