LUGGAGE COMPARTMENT DOOR OPENER INNER SWITCH REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL

    A01FSJSE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the center instrument cluster finish panel.

    2. Detach the 9 clips and guide.

    3. Disconnect the connector and remove the center instrument cluster finish panel.

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    A01FTVNE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the instrument panel finish panel end LH.

    2. Detach the 5 clips and 2 guides and remove the instrument panel finish panel end LH.

  3. REMOVE INSTRUMENT SIDE PANEL LH

    A01FUFWE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the instrument side panel LH.

    2. Using a moulding remover, detach the 7 clips and remove the instrument side panel LH.

  4. REMOVE NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

    A01FTZQE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the No. 1 instrument panel garnish sub-assembly.

    2. Using a moulding remover, detach the 4 clips and remove the No. 1 instrument panel garnish sub-assembly.

  5. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    A01FVMJ

    1. Remove the 3 screws <A>.

    2. Detach the 2 claws.

    3. Disconnect the connectors, detach the clamp and remove the No. 1 instrument panel under cover sub-assembly.

  6. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    A01FSAJ

    1. Detach the 9 clips and guide.

    2. Disconnect the connectors and remove the No. 1 instrument panel safety pad sub-assembly.

  7. REMOVE LUGGAGE DOOR OPENING SWITCH ASSEMBLY


    1. A01FVL8

      Detach the 2 claws and remove the luggage door opening switch from the No. 1 instrument panel safety pad.