DESCRIPTION
DTC B2222 is output in the following situations: 1) When the pulse sensor of the luggage closer motor assembly has a malfunction and a normal waveform is not input into the pulse sensor during the power trunk lid operation, or 2) When there is a malfunction in the power trunk opener and closer activation power supply.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B2222 | Pulse sensor of luggage closer motor assembly has malfunction or activation power supply has malfunction |
|
| B2225 | Clutch of luggage closer motor assembly has malfunction or activation power supply has malfunction |
WIRING DIAGRAM
Refer to the "System Diagram" Click here.
INSPECTION PROCEDURE
Note
Inspect the fuses for circuits related to this system before performing the following inspection procedure.
When using the GTS with the power switch off to troubleshoot:
Connect the GTS to the DLC3 and turn a courtesy light switch on and off at 1.5-seconds intervals until communication between the GTS and vehicle begins.
PROCEDURE
CLEAR DTC
Clear the DTCs Click here.
| NEXT |
|
CHECK FOR DTC
Check for DTCs Click here.
| OK |
|---|
| DTC B2222 or B2225 is not output. |
| NG |
|
CHECK HARNESS AND CONNECTOR (LUGGAGE CLOSER MOTOR ASSEMBLY - BATTERY) Click here |
| OK |
|
USE SIMULATION METHOD TO CHECK Click here
CHECK HARNESS AND CONNECTOR (LUGGAGE CLOSER MOTOR ASSEMBLY - BATTERY)
| *a | Front view of wire harness connector (to Luggage Closer Motor Assembly) |
Disconnect the luggage closer motor assembly connector.
Measure the voltage according to the value(s) in the table below.
| Standard Voltage | ||||||
|---|---|---|---|---|---|---|
|
| NG |
|
REPAIR OR REPLACE HARNESS OR CONNECTOR |
| OK |
|
REPLACE LUGGAGE CLOSER MOTOR ASSEMBLY Click here