CUSTOMIZE POWER TRUNK LID SYSTEM
The following items can be customized.
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the GTS.
When using the GTS with the power switch off to troubleshoot:
Connect the GTS to the DLC3 and turn a courtesy light switch on and off at 1.5-seconds intervals until communication between the GTS and vehicle begins.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Customize Setting / Back Door or Door Lock.
Select the setting by referring to the table below:
|PBD Power Operation||ON||Turns power trunk opener and closer function ON or OFF.||ON or OFF||Luggage closer motor assembly|
|Trunk Link with Door Lock||ON||Function that opens the luggage compartment door when the luggage electrical key switch is pressed and all doors are unlocked.||ON or OFF||Main body ECU (multiplex network body ECU)|