POWER WINDOW MASTER SWITCH REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT UPPER ARMREST BASE PANEL LH


    1. A01FTIQ

      Detach the 2 clips and 5 claws.

    2. Disconnect the connector and remove the power window regulator master switch assembly with front door armrest base panel.

  2. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY


    1. A01FQV0

      Detach the 12 claws and remove the multiplex network master switch assembly.