REAR SUNSHADE SWITCH (for Rear Side) DISASSEMBLY

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE COOLER CONTROL SWITCH PANEL


    1. A01FU3C

      Remove the 3 screws.

    2. A01FQW8

      Using a screwdriver, detach the 12 claws and remove the cooler control switch panel.

  2. REMOVE COOLER CONTROL SWITCH KNOB


    1. A01FQO2

      Remove the cooler control switch knob from the cooler control case.

      Note


      • When replacing the cooler control switch knob, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the circuit board sub-assembly from being damaged.

      • Do not damage the circuit board sub-assembly.

    2. A01FUOK

      Remove the 3 screws and circuit board sub-assembly.

      Note


      • When replacing the cooler control switch knob, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the circuit board sub-assembly from being damaged.

      • Do not damage the circuit board sub-assembly.

    3. A01FUWQ

      Remove the rubber switch from the cooler control switch knob (rear sunshade switch).