REAR SUNSHADE SWITCH (for Front Side) REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL

    A01FSJSE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the center instrument cluster finish panel.

    2. Detach the 9 clips and guide.

    3. Disconnect the connector and remove the center instrument cluster finish panel.

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    A01FTVNE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the instrument panel finish panel end LH.

    2. Detach the 5 clips and 2 guides and remove the instrument panel finish panel end LH.

  3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    A01FQJCE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the instrument panel finish panel end RH.

    2. Detach the 5 clips and 2 guides and remove the instrument panel finish panel end RH.

  4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    A01FTBY

    1. Twist the shift lever knob sub-assembly in the direction indicated by the arrow and remove it.

  5. REMOVE UPPER CONSOLE PANEL

    A01FVHLE01
    Text in Illustration
    *1 Upper Console Panel
    *2 Upper Rear Console Panel Sub-assembly
    *3 Remote Touch Assembly

    1. Remove the 2 screws.

    2. Detach the 9 clips.

    3. Disconnect the connectors, detach the clamps, and remove the upper console panel together with the upper rear console panel sub-assembly and remote touch assembly.

  6. REMOVE REAR SUNSHADE SWITCH ASSEMBLY

    A01FS69E01
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 2 claws and remove the rear sunshade switch assembly.

      Tech Tips

      Tape the screwdriver tip before use.