REAR SUNSHADE ASSEMBLY INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL REAR WINDOW SHADE ASSEMBLY


    1. Connect the connector.

    2. A01FS9BE01
      Text in Illustration
      *1 Bolt A
      *2 Bolt B

      Install the rear window shade assembly with the bolt A and 3 bolts B.

      Torque:
      for Bolt A
      15 N*m  { 153 kgf*cm, 11 ft.*lbf }
      for Bolt B
      15 N*m  { 153 kgf*cm, 11 ft.*lbf }

  2. INSTALL NO. 2 PACKAGE TRAY TRIM PANEL ASSEMBLY


    1. Attach the 5 guides and 3 clips to install the No. 2 package tray trim panel assembly.

  3. INSTALL CENTER STOP LIGHT COVER


    1. Connect the connector.

    2. Attach the 4 claws to install the center stop light cover.

  4. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY


    1. w/o Rear Sunshade:


      1. Pass the 3 rear seat belt floor anchors through the package tray trim panel assembly.

      2. Insert the package tray trim panel assembly into the 5 guides and attach the 4 clips to install the package tray trim panel assembly.

      3. Connect the center stop light assembly connector.

      4. Attach the 4 claws to install the center stop light cover.

    2. w/ Rear Sunshade:


      1. Pass the 3 rear seat belt floor anchors through the package tray trim panel assembly.

      2. Insert the package tray trim panel assembly into the rear window shade assembly and attach the 4 clips to install the package tray trim panel assembly.

    3. Attach the 4 claws to install the belt guide of rear seat inner with center belt assembly LH to the package tray trim panel assembly.

    4. Attach the 4 claws to install the 2 rear seat shoulder belt hole covers to the package tray trim panel assembly.

    5. Attach the 4 claws to install the 3 child restraint tether anchor covers.

  5. INSTALL INNER ROOF SIDE GARNISH LH

    A01FQFNE01
    Text in Illustration
    *1 End Of The Rear Window Shade Assembly
    *2 Guide

    1. w/ Rear Sunshade:


      1. Insert the rear window shade assembly and attach the 3 guides.

      2. Attach the 4 clips to install the inner roof side garnish LH.

        Note

        After installing the inner roof side garnish LH, make sure that the lip of the rear door opening trim weatherstrip LH is not pinched.

    2. w/o Rear Sunshade:


      1. Attach the 4 clips and 3 guides to install the inner roof side garnish LH.

        Note

        After installing the inner roof side garnish LH, make sure that the lip of the rear door opening trim weatherstrip LH is not pinched.

  6. INSTALL INNER ROOF SIDE GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. INSTALL REAR SEAT SIDE GARNISH LH


    1. Attach the 4 claws and guide to install the rear seat side garnish LH.

      Note

      After installing the rear seat side garnish LH, make sure that the lip of the rear door opening trim weatherstrip LH is not pinched.

  8. INSTALL REAR SEAT SIDE GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  9. INSTALL REAR DOOR SCUFF PLATE LH


    1. Attach the 10 claws and 3 clips to install the rear door scuff plate LH.

  10. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

  11. INSTALL REAR SEAT ASSEMBLY

    Click here

  12. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL (w/ Rear Seat Side Airbag)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  13. INSPECT REAR SEAT HEATER SYSTEM (w/ Rear Seat Heater System)

    Click here

  14. INSPECT REAR SUNSHADE SYSTEM

    Click here

  15. CHECK SRS WARNING LIGHT (w/ Rear Seat Side Airbag)

    Click here

  16. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH (w/ Rear Seat Side Airbag)


    1. Install the luggage compartment trim cover LH.

  17. INSTALL LUGGAGE COMPARTMENT FLOOR MAT (w/ Rear Seat Side Airbag)


    1. Install the luggage compartment floor mat.