COMBINATION SWITCH INSPECTION


  1. INSPECT COMBINATION SWITCH ASSEMBLY


    1. A01FQC4E02
      Text in Illustration
      *a

      Component without harness connected

      (Combination Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      8 - 4 Mode switch being turned and held at ECO position Below 1 Ω
      8 - 4 Mode switch not turned 10 kΩ or higher

      If the result is not as specified, replace the combination switch assembly.