AIR CONDITIONING PRESSURE SENSOR REMOVAL


  1. REMOVE FRONT BUMPER COVER


    1. for Sport Package:

      Click here

    2. except Sport Package:

      Click here

  2. RECOVER REFRIGERANT FROM AIR CONDITIONING SYSTEM


    1. Turn the power switch on (READY).

    2. Turn the A/C switch on.

    3. Operate the air conditioning with a set temperature of 25°C (77°F) and the blower at low for 10 minutes to circulate the refrigerant. This causes most of the compressor oil from the various components of the air conditioning system to collect in the air conditioning compressor.

    4. Turn the power switch off.

    5. Recover the refrigerant from the air conditioning system using a refrigerant recovery unit.

  3. REMOVE LOW PITCHED HORN ASSEMBLY


    1. A01FUT2

      Disconnect the connector.

    2. Remove the bolt and low pitched horn assembly.

  4. REMOVE AIR CONDITIONING PRESSURE SENSOR


    1. Disconnect the connector.

    2. A01FUF7

      Using a 27 mm deep socket wrench, remove the air conditioning pressure sensor.

    3. Remove the O-ring from the air conditioning pressure sensor.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.