POWER OUTLET SOCKET REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL

    A01FSJSE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the center instrument cluster finish panel.

    2. Detach the 9 clips and guide.

    3. Disconnect the connector and remove the center instrument cluster finish panel.

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    A01FU57E01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the instrument panel finish panel end LH.

    2. Detach the 5 clips and 2 guides and remove the instrument panel finish panel end LH.

  3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    A01FS1UE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the instrument panel finish panel end RH.

    2. Detach the 5 clips and 2 guides and remove the instrument panel finish panel end RH.

  4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. Detach the claw and slide the shifting hole cover downwards.

    2. Twist the shift lever knob sub-assembly in the direction indicated by the arrow and remove it.

      A01FQDFE01
      Text in Illustration
      *1 Shifting Hole Cover - -

  5. REMOVE UPPER CONSOLE PANEL

    A01FVW3E01
    Text in Illustration
    *1 Upper Console Panel
    *2 Upper Rear Console Panel Sub-assembly
    *3 Remote Touch Assembly

    1. Remove the 2 screws.

    2. Detach the 9 clips.

    3. Disconnect the connectors, detach the clamps, and remove the upper console panel together with the upper rear console panel sub-assembly and remote touch assembly.

  6. REMOVE LOWER CONSOLE BOX POCKET

    A01FS5V

    1. Disconnect the connectors.

    2. Detach the 8 claws and remove the lower console box pocket.

  7. REMOVE NO. 3 POWER OUTLET SOCKET ASSEMBLY

    A01FTZDE01
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the claw and pull out the No. 3 power outlet socket assembly in the direction of the arrow in the illustration to remove it.

      Tech Tips

      Tape the screwdriver tip before use.

  8. REMOVE NO. 2 POWER OUTLET SOCKET COVER

    A01FQW1

    1. Detach the 2 claws and remove the No. 2 power outlet socket cover.