CONDENSER REMOVAL


  1. RECOVER REFRIGERANT FROM AIR CONDITIONING SYSTEM


    1. Turn the power switch on (READY).

    2. Turn the A/C switch on.

    3. Operate the air conditioning with a set temperature of 25°C (77°F) and the blower at low for 10 minutes to circulate the refrigerant. This causes most of the compressor oil from the various components of the air conditioning system to collect in the air conditioning compressor.

    4. Turn the power switch off.

    5. Recover the refrigerant from the air conditioning system using a refrigerant recovery unit.

  2. REMOVE FRONT BUMPER COVER


    1. for Sport Package:

      Click here

    2. except Sport Package:

      Click here

  3. REMOVE UPPER RADIATOR SUPPORT

    Click here

  4. REMOVE RADIATOR GRILLE SIDE AIR GUIDE LH


    1. A01FQ5Z

      Remove the 4 clips.

    2. Detach the clip and remove the radiator grille side air guide LH.

  5. DISCONNECT LIQUID TUBE SUB-ASSEMBLY A


    1. A01FRJN

      Remove the bolt and disconnect the liquid tube sub-assembly A from the cooler condenser assembly.

    2. Remove the O-ring from the liquid tube sub-assembly A.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.

  6. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    1. A01FU4W

      Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the cooler condenser assembly.

    2. Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.

  7. REMOVE COOLER CONDENSER ASSEMBLY


    1. A01FU9K

      Remove the bolt.

    2. A01FVT2

      Remove the 2 bolts.

    3. A01FVQ6

      Remove the 2 bolts.

    4. A01FUE3

      Remove the 2 bolts and cooler condenser assembly.