PTC HEATER ASSEMBLY INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL QUICK HEATER ASSEMBLY


    1. Attach the 2 claws to install the quick heater assembly.

      Note

      If the claws of the quick heater assembly are damaged, install the quick heater assembly with 2 screws (90159-50327).

  2. INSTALL NO. 2 AIR DUCT SUB-ASSEMBLY (for LHD)


    1. Install the No. 2 air duct sub-assembly with the screw.

  3. INSTALL NO. 1 AIR DUCT SUB-ASSEMBLY (for RHD)


    1. Install the No. 1 air duct sub-assembly with new clip.

  4. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here