PTC HEATER ASSEMBLY INSPECTION


  1. INSPECT QUICK HEATER ASSEMBLY


    1. A01FTUDE01
      Text in Illustration
      *a

      Component without harness connected

      (Quick Heater Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      A-1(E) - A-2(B) Always Below 1 Ω
      B-1(E) - B-2(B) Always Below 1 Ω
      A-1(E) - B-1(E) Always 10 kΩ or higher

      If the result is not as specified, replace the quick heater assembly.