FRONT BLOWER MOTOR INSTALLATION


  1. INSTALL BLOWER WITH FAN MOTOR SUB-ASSEMBLY


    1. When reusing the blower motor with fan sub-assembly:


      1. Install a new heater packing to the blower motor with fan sub-assembly.

        Tech Tips

        For details, refer to the instruction manual provided with the part.

    2. Install the blower with fan motor sub-assembly with the 3 screws.

    3. Connect the connector.

  2. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. Connect the connectors and attach the clamp.

    2. Attach the 5 clips and 2 guides to install the No. 2 instrument panel under cover sub-assembly.

  3. INSTALL INSTRUMENT PANEL FINISH PANEL END RH


    1. Attach the 5 clips and 2 guides to install the instrument panel finish panel end RH.

  4. INSTALL FRONT DOOR OPENING TRIM COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  5. INSTALL INSTRUMENT SIDE PANEL RH


    1. w/ Airbag Cut Off Switch:


      1. Connect the connector.

    2. Attach the 7 clips to install the instrument side panel RH.

  6. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL


    1. Connect the connector.

    2. Attach the 9 clips and guide to install the center instrument cluster finish panel.