CLOCK REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL

    A01FSJSE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the center instrument cluster finish panel.

    2. Detach the 9 clips and guide.

    3. Disconnect the connector and remove the center instrument cluster finish panel.

  2. REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY


    1. A01FVOP

      Remove the 2 bolts.

    2. A01FS6G

      Detach the 2 claws and 2 clips.

    3. Pull out the multi-media module receiver assembly.

    4. Disconnect the connectors and remove the multi-media module receiver assembly.

  3. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

    A01FSL9E01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the No. 2 instrument panel register assembly.

    2. Using a moulding remover, detach the 7 clips.

    3. Disconnect the connectors and remove the No. 2 instrument panel register assembly.

  4. REMOVE CLOCK ASSEMBLY

    A01FS1YE01
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 2 claws and remove the clock assembly.

      Tech Tips

      Tape the screwdriver tip before use.