METER / GAUGE SYSTEM SYSTEM DESCRIPTION

METER GAUGE AND WARNING/INDICATOR

Text in Illustration
*1	Hybrid System Indicator / Tachometer	*2	Speedometer
*3	Multi-information Display	*4	Engine Coolant Temperature Receiver Gauge
*5	Fuel Receiver Gauge	*6	Eco Light

Meter/Gauge
Item	Details
Hybrid system indicator (Sport mode off)	The combination meter receives an eco-zone indicator level signal from the power management control ECU and the gauge needle operates (CAN).
Tachometer (Sport mode on)	The combination meter receives an engine speed signal from the ECM and the gauge needle operates (CAN).
Speedometer	Based on a signal received from the wheel speed sensors, the skid control ECU assembly calculates the vehicle speed and transmits data to the combination meter (CAN).
ODO/TRIP meter	The combination meter receives a vehicle speed pulse integration signal from the skid control ECU assembly and the ODO/TRIP meter display operates (CAN). The ODO/TRIP meter display changes when the ODO/TRIP switch is operated.
Engine coolant temperature gauge	The combination meter receives an engine coolant temperature signal from the ECM and the gauge needle operates (CAN).
Fuel receiver gauge	The combination meter receives fuel amount information measured by the fuel sender gauge and the gauge needle operates (Direct line).

Warning/Indicator
Item	Details
Turn indicator light (LH/RH)	Receives a turn signal from the hazard warning switch or turn signal switch (Direct line).
Front fog indicator light*1	Receives front fog indicator light signals from the main body ECU (CAN).
Rear fog indicator light*2	Receives rear fog indicator light signals from the main body ECU (CAN).
High beam indicator light	Receives high beam indicator light signals from the main body ECU (CAN).
taillight indicator light	Receives taillight indicator light signals from the main body ECU (CAN).
Open door warning light	Receives door open signals from the main body ECU (CAN).
Front seat belt warning light	Receives driver seat belt signals (unfastened) or passenger seat belt signals (unfastened) from the main body ECU (CAN).
SRS warning light	Receives malfunction signals from the center airbag sensor (CAN).
Master warning light	Receives warning signals from sensors and ECUs (Direct line and CAN).
MIL	Receives malfunction signals from the ECM (Direct line).
Charge warning light	Receives malfunction signals from the generator (Direct line and CAN).
EPS warning light	Receives power steering warning signals from the power steering ECU (CAN).
AFS OFF indicator light*8	Receives AFS OFF indicator signals from the headlight swivel ECU (CAN).
Brake warning light	Receives brake fluid level warning signals from the skid control ECU assembly (CAN). Electronically controlled brake system is malfunctioning (CAN).
Parking brake warning light	Receives parking brake signals from the parking brake ECU (CAN).
EPB/ECB warning light	Receives malfunction signals from the parking brake ECU (CAN).
Cruise indicator light	Receives a cruise control switch signal from the ECM (CAN).
Radar cruise indicator light*3	Receives radar cruise indicator signals from the ECM (CAN).
SET indicator light	Receives a cruise control switch signal from the ECM (CAN).
Clearance sonar indicator light*4	Receives a clearance sonar indicator signal from the clearance warning ECU (CAN).
Fuel level warning light	Receives signals from the fuel sender gauge indicating low or no fuel (Direct line).
ABS warning light	Receives malfunction signals from the skid control ECU assembly (CAN).
Slip indicator light	Receives slip indicator signals from the skid control ECU assembly (CAN).
VSC OFF indicator light	Receives VSC OFF indicator signals from the skid control ECU assembly (CAN).
PCS warning light*5	Receives a PCS warning signal from the seat belt control ECU (CAN).
LKA indicator light*6	Receives a LKA indicator signal from the driving support ECU (CAN).
Automatic high beam indicator light*7	Receives automatic high beam indicator signals from the main body ECU (CAN).
Tire pressure warning light*9	Receives a tire pressure warning signal from the main body ECU (CAN).
EV mode indicator light	Receives an EV mode indicator signal from the power management control ECU (CAN).
READY indicator light	Receives a READY indicator signal from the power management control ECU (CAN).
Brake hold standby indicator light	Receives brake hold standby indicator signals from the skid control ECU assembly (CAN).
Brake hold operated indicator light	Receives brake hold operated indicator signals from the skid control ECU assembly (CAN).