PERSONAL LIGHT REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE FRONT SEAT ASSEMBLY LH


    1. for Standard Seat Type:

      Click here

    2. for Sports Seat Type:

      Click here

    3. for Luxury Seat Type:

      Click here

  2. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY LH (for Standard Seat Type)

    A01FV1P

    1. Using a clip remover, remove the clip and disconnect the rubber band.

    2. Detach the hook and disconnect the rubber band.

    3. Using a clip remover, remove the clip.

    4. A01FSUB

      Open the lower part of the front seatback board sub-assembly LH and remove the 2 screws.

    5. Push and slide the front seatback board subassembly LH to detach the claw.

      Tech Tips

      Use the same procedure to detach the claw on the other side.

    6. Slide the front seatback board sub-assembly LH downward to detach the 2 hooks and remove it.

  3. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY LH (for Sports Seat Type)


    1. A01FTZM

      Using a clip remover, remove the clip and disconnect the rubber band.

    2. Detach the hook and disconnect the rubber band.

    3. Using a clip remover, remove the clip.

    4. A01FSUB

      Open the lower part of the front seatback board sub-assembly LH and remove the 2 screws.

    5. Push and slide the front seatback board subassembly LH to detach the claw.

      Tech Tips

      Use the same procedure to detach the claw on the other side.

    6. Slide the front seatback board sub-assembly LH downward to detach the 2 hooks and remove it.

  4. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY LH (for Luxury Seat Type)

    A01FTZM

    1. Using a clip remover, remove the clip and disconnect the rubber band.

    2. Detach the hook and disconnect the rubber band.

    3. Using a clip remover, remove the clip.

    4. A01FR0V

      Open the lower part of the front seatback board sub-assembly LH and remove the 2 screws.

    5. Push and slide the front seatback board subassembly LH to detach the claw.

      Tech Tips

      Use the same procedure to detach the claw on the other side.

    6. Slide the front seatback board sub-assembly LH downward to detach the 2 hooks and remove it.

  5. REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY


    1. A01FQCV

      Detach the 3 guides and remove the separate type front seatback cover.

    2. A01FU7Q

      Remove the screw and No. 1 interior illumination light assembly.

    3. Disconnect the connector.