INSIDE HANDLE LIGHT (for Front Door) INSPECTION


  1. INSPECT FRONT DOOR INSIDE HANDLE ILLUMINATION LIGHT ASSEMBLY LH

    A01FSR8E47
    Text in Illustration
    *a

    Component without harness connected

    (Front Door Inside Handle Illumination Light Assembly LH)

    1. Apply auxiliary battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition

      Auxiliary battery positive (+) → Terminal 2 (+)

      Auxiliary battery negative (-) → Terminal 1 (-)

      		 Illuminates

      If the result is not as specified, replace the front door inside handle illumination light assembly LH.

  2. INSPECT FRONT DOOR INSIDE HANDLE ILLUMINATION LIGHT ASSEMBLY RH

    A01FSR8E47
    Text in Illustration
    *a

    Component without harness connected

    (Front Door Inside Handle Illumination Light Assembly RH)

    1. Apply auxiliary battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition

      Auxiliary battery positive (+) → Terminal 2 (+)

      Auxiliary battery negative (-) → Terminal 1 (-)

      		 Illuminates

      If the result is not as specified, replace the front door inside handle illumination light assembly RH.

  3. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH

    A01FRPXE01
    Text in Illustration
    *a

    Component without harness connected

    (No. 1 Interior Illumination Light Assembly LH)

    1. Apply auxiliary battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition

      Auxiliary battery positive (+) → Terminal 1 (+)

      Auxiliary battery negative (-) → Terminal 2 (-)

      		 Illuminates

      If the result is not as specified, replace the No. 1 interior illumination light assembly LH.

  4. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH

    A01FRPXE01
    Text in Illustration
    *a

    Component without harness connected

    (No. 1 Interior Illumination Light Assembly RH)

    1. Apply auxiliary battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition

      Auxiliary battery positive (+) → Terminal 1 (+)

      Auxiliary battery negative (-) → Terminal 2 (-)

      		 Illuminates

      If the result is not as specified, replace the No. 1 interior illumination light assembly RH.